I would just like to say that this product is absolutely amazing. It is so easy to apply and the results are spot on. I use it on items that we gold plate. I recommend not using any Acetone to clean items as this causes issues that I quickly worked out. I tend to use smaller pieces of the lint free cloths also purchased and if lacquering larger items I use a few small pieces and have outstanding results. I just use the prep 1-4 mix and let dry and then straight on with the lacquer. I've never needed to use anything else at all to prep anything. This is on newly plated items that are not touched other than with nitrile gloves on.

Hello!

I am using Protectaclear on mild steel and copper parts. The first time I used it I good a good result. Since then the finish has not come out right. Please see attached pictures below , these taken after about 18 hours drying.

I have attempted to coat these particular parts twice now, and both times I have had a similar result. I had to spend nearly a day removing the finish with Acetone after the first failed attempt and now on the second attempt I have the same poor result! All parts are cleaned carefully with acetone and allowed to fully dry before coating. Indoor environment at around 15C, and I am using brand new lint free cloths each time. Application by wiping on and pot well shaken before use. It goes on fine initially and looks to be self levelling OK as expected, but then seems t…

Can protecaclear used on 304 stainless steel to prevent corrosion in coastal areas ,ie a harbour,if so would it need re treating

Hello!

I am looking to protect and seal mild steel with a brushed finish. Should I use ProtectaClear or the Stainless Steel protector fluid (PC 279)?

Which is the best cleaner to use?

Thanks!

Alex

Im interested in the large jewellery Kit because we are trying to make copper bracelats and im loosing the gloss in the copper after some time(when wearing). So i would like to ask if the Kit will help to keep that gloss and for how long? And if It needs to be reapplied And if yes after what time?

Just had a new glass balcony installed.We live on the coast so plenty of salt and wind about. The bottom retaining track is made of Aluminium with the surface a silver coloured anodised finish. We would like to protect this metal to maintain the metals appearance and reduce the need to clean to remove 'spots' in the future. Any ideas?

Hi,

What product best to protect this metal rhino..... made from scrap metal so a mixture of metal types. Assume spray gun best for application.

Thanks

MATT

So I just bought a new bottle of Protactaclear and used the new cloth to apply it to some jewellery.

But how do you clean the cloth or a brush after?

Soap and water did not work, just left the cloth all stiff and sticky.

Dear valued customers,

We wish to let you know that due to the imminent discontinuation of the forum function by our website engine provider, the Everbrite Forum has now been upgraded to Everbrite Groups. You may now freely select topic groups according to your needs and post within them. We've got built-in spam detection, but please be careful and don't click on posts that the topic aren't related to this website. Just be careful not to click any links or buttons in user posts, to keep things safe.

We sincerely hope you enjoy using our products and look forward to you sharing any related content within our group. Enjoy the journey!

Everbrite UK Team