Protect Your Beautiful Jewelry
Copper, Brass, Silver, Gold, Bronze, Metal Clay, Nickel and More...

We know that copper, brass and silver jewellery is gorgeous but it is frustrating to keep polished and that jewellery with patinas can fade without protection. So many jewellery designers and manufacturers are using less expensive metals these days but have problems with tarnish, fingerprints and skin discoloration

Thousands of jewelry designers, manufacturers and owners solve the following problems with ProtectaClear.

They are now confident that their customers will be happy with the quality of their jewelry.  ProtectaClear is a skin-safe, anti-tarnish clear coating that is practically invisible and will protect your jewelry from tarnish, oxidation and fading.

  • Copper, Brass, Silver and Wire-wrapped jewelry needs protection from tarnish and fingerprints.

  • Metal Clay jewelry needs protection.

  • Copper jewelry can make skin darken and discolor.

  • Gold plated jewelry can wear down to the base metal.

ProtectaClear is a practically invisible, clear protective coating that will solve these problems. All the pieces above are coated with ProtectaClear to prevent tarnish and oxidation and preserve the beautiful colors. 

ProtectaClear is a practically invisible, clear protective coating that will solve these problems.

All the pieces that are coated with ProtectaClear to prevent tarnish and oxidation and preserve the beautiful colors. ProtectaClear is skin safe once it is cured.

ProtectaClear will:

  • Stop tarnish and oxidation on jewelry.

  • Preserve Patinas from discoloring and wearing off.

  • Protect plated metals from wearing off.

  • Seal metal and stop skin discoloration.

ProtectaClear is a clear, protective coating that is easy to apply but is tough enough to protect jewellery and is safe for wear against skin. ProtectaClear is practically invisible once applied, dries quickly and will seal and protect jewellery from tarnish, oxidation, and corrosion. ProtectaClear can be applied on jewellery by spraying, brushing or by dipping. It is really a personal preference


Is ProtectaClear safe on jewelry to be worn on skin? 

Yes, ProtectaClear is safe on skin and is used by many jewelery designers.

ProtectaClear will protect the copper as well as the skin of the wearer from discoloration. ProtectaClear is practically invisible and is used on polished copper and even copper with patina on it. ProtectaClear is tough and scratch resistant, once it is cured.

Can ProtectaClear be used on Stones or Minerals? 

Yes, ProtectaClear can be used on stones and minerals and will enhance the look. However, delicate gems like pearls or opals should not be coated with anything. Also, coating soft plastic beads or non-metalic stringing material is not recommended.

Can ProtectaClear be removed from stones or minerals?

Yes, ProtectaClear can be removed if necessary with a Q-tip using a solvent such as Xylene.


Copper and Brass Cleaner


Copper and Brass Cleaner

HD Gel Copper cleaner Everbrite UK

Everbrite™ HD Gel Copper Cleaner. Environmentally Friendly, Heavy Duty Copper Cleaner. Use on Copper Roofs, Copper Gutters, Copper Hoods, Fireplaces & other copper that is difficult to clean. 

Everbrite™ HD Gel Copper Cleaner is a unique solution which has been blended specifically to remove tarnish and oxides from copper based metals.  This is the cleaner only, this Gel does not keep copper shiny.  You will need Everbrite or ProtectaClear Coating to keep the metal shiny and prevent further tarnish. 

Everbrite™ HD Gel will cling on copper roofs, copper walls or other copper preventing run-off.

Everbrite™ HD Gel Copper Cleaner is strong enough to restore tarnished and stained copper back to it's original copper shine - but is also environmentally safe as well - non-toxic, non-hazardous - it will not harm shrubs or plants in flower beds!

Just paint on Everbrite HD Gel and let it work. Comes in a wide mouth jar for easy access. Scrub surface clean. Wash off with water. 

Everbrite™ HD Gel is an acid based cleaner that needs to be neutralised with Prep 505 before coating with Everbrite™ Coating.